Brother PT-1910 - Manual (Page 34)

26
With the Font function, you can choose one of two fonts for your text.
The following font settings are available:
The default font setting is FONT 1. The font indicator at the bottom left of the display shows
the currently selected font setting.
To change the font setting:
1 While holding down c, press 1 once, and keep c held down to display the
current font setting.
2 While still holding down c, continue pressing 1 until the desired font setting is
displayed.
☞
The current font setting is shown by the font indicator at the bottom left of the dis-
play.
3 Release c to apply the selected font setting to the entire text.
EXAMPLE
To select the FONT 2 font setting:
1 While holding down c , press 1 once,
and keep c held down.
2 While still holding down c , continue pressing
1 until FONT 2 is displayed.
3 Release c .
FONT FUNCTION
1
F O N T
2
F O N T A