Manual configuration for a wi-fi direct network – Brother MFC-9130CW User Manual
Page 18
Configuration methods
15
2
Manual configuration for a Wi-Fi Direct network
2
If your mobile device does not support Wi-Fi Direct or WPS, you must configure a Wi-Fi Direct network
manually.
a
Press .
b
Press Wi-Fi Direct.
c
Swipe up or down, or press a or b to display Manual.
Press Manual.
d
When Wi-Fi Direct On? is displayed, press On to accept.
To cancel, press Off.
e
The machine will show the SSID name and Password for two minutes. Go to the wireless network
settings page of your mobile device and input the SSID name and password.
f
If your mobile device connects successfully, the machine shows Connected.
You have completed the Wi-Fi Direct network setup. For details on printing from or scanning to your
mobile device, download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from
the Brother Solutions Center .
If the connection fails, see Troubleshooting on page 16.