Brother MFC-J430W - Manual (Page 7)

7
5
Check the print quality
a
When the preparation process has finished, the
LCD shows Set Paper and Press Start.
Press Color Start.
b
Check the quality of the four color blocks on the
sheet. (black/yellow/cyan/magenta)
c
If all lines are clear and visible, press 1 (Yes) to
finish the quality check and go to step
6.
If you can see missing short lines, press 2 (No)
and follow the steps on the LCD.
6
Wireless setup
(if needed)
For wireless setup using a Macintosh computer or
mobile device, go to
a.
For Windows users (all connections) and Macintosh
USB connections, go to
b.
a
If you are using a Macintosh computer or a
mobile device on a wireless network, press
OK.
Press a or b to choose Yes.
Press OK.
Then go to step
18 on page 19 to continue the
wireless setup.
After finishing the wireless setup you will need
to return to step
7 to finish the machine setup.
b
If you are using a Windows
®
computer or want
to connect your Macintosh using USB, press
OK.
Press a or b to choose No.
Press OK.
Then go to step
7.
The wireless setup for Windows ® users will be
covered in later steps.
7
Choose your language
(if needed)
a
Press Menu.
b
Press a or b to choose Initial Setup.
Press OK.
c
Press a or b to choose Local Language.
Press OK.
d
Press a or b to choose your language.
Press OK.
e
Press Stop/Exit.
OK
Poor
Note
If you want to change the language on your
machine first, you can choose No and you will be
able to configure the wireless settings later.