Brother MFC-3420C - Manual (Page 11)

9
S
e
tt
ing U
p
the M
a
chi
n
e
W
indow
s
®
Ma
c
O
S
®
8
.6-
9.
2
Ma
c
OS
®
X
10
.1
/1
0
.2.
1
or
gr
e
at
e
r
Step A: Color Block Quality
Check
1
The LCD shows:
Check the quality of the four color blocks
formed by the short lines printed on the
sheet.
(BLACK/CYAN/YELLOW/MAGENTA)
2
If all lines are clear and visible, press
on the dial pad to go to STEP B: Alignment
Check.
---OR---
If you can see missing short lines, press
on the dial pad and go to 3 .
3
The LCD asks you if the print quality is OK
for each color. Press
or on the
dial pad.
When you have finished selecting
(YES) or (NO) for each color, the
LCD shows:
Press (YES), and then MFC starts
cleaning the colors.
After cleaning is finished, press
Color Start. The MFC starts printing the
PRINT QUALITY CHECK SHEET again
and goes back to the first step of STEP A.
Step B: Alignment Check
1
The LCD shows:
Check the 600 dpi and 1200 dpi test print to
see if No.5 most closely matches the OK
sample (No.0). Press
if No.5 matches
it.
If another test print number is a better match
for either 600 dpi or 1200 dpi, press
to
select NO and go to 2 .
2
For 600 dpi, select the number from 1 to 8
that most closely matches the No.0 sample
and enter it using the dial pad.
3
For 1200 dpi, enter the number from 1 to 8
that most closely matches the No.0 sample.
The Quality check is now complete.
Is Step "A" OK?
1.Yes 2.No
Black OK?
1.Yes 2.No
Start Cleaning?
1.Yes 2.No
OK Poor
Is Step "B" OK?
1.Yes 2.No
Select Best #
Select Best #
600 DPI 1200 DPI
No.5