Brother MFC J265W - Manual (Page 7)

7
Note
• DO NOT connect your machine to an AC power outlet on the same circuit as large appliances
or other equipment that might disrupt the power supply.
• DO NOT connect your machine to an AC power outlet controlled by wall switches or automatic
timers.
• Avoid interference sources, such as speakers or the base units of non-Brother cordless
telephones.
• DO NOT place anything in front of the machine that will block received faxes. DO NOT place
anything in the path of received faxes. (MFC only)
• Wait until pages have exited the machine before picking them up.
• The power cord, including extensions, should be no longer than 16.5 feet (5 meters).
DO NOT share the same power circuit with other high powered appliances, such as an air
conditioner, copier, shredder, and so on. If you cannot avoid using the printer with these
appliances, we recommend that you use a voltage transformer or a high-frequency noise filter.
Use a voltage regulator if the power source is not stable.
• To protect your product against power surges, we recommend the use of a power protection
device (Surge Protector).
Standard telephone and FCC notices (These notices are in effect
on models sold and used in the United States only.) (MFC only)
1
When programming emergency numbers or making test calls to emergency numbers:
 Remain on the line and briefly explain to the dispatcher the reason for the call before hanging
up.
 Perform these activities in the off-peak hours, such as early morning or late evening.
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the
ACTA. On the backside of this equipment is a label that contains, among other information, a
product identifier in the format US: AAAEQ##TXXXX. If requested, this number must be provided
to the telephone company.
You may safely connect this equipment to the telephone line by means of a standard modular jack,
USOC RJ11C.
A plug and jack used to connect this equipment to the premises wiring and telephone network
must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA.
A compliant telephone cord and modular plug is provided with this product. It is designed to be
connected to a compatible modular jack that is also compliant. See installation instructions for
details.