Brother MFC-795CW - Manual (Page 2)

2
2
Connect the handset
a
Connect the curled handset cord to the
handset.
3
Load plain Letter/A4
paper
a
Pull the paper tray a completely out of the
machine.
b
Lift the output paper tray cover a .
c
With both hands, gently press and slide the
paper side guides
a and then the paper length
guide b to fit the paper size you are loading in
the tray.
Make sure that the triangular marks
c on the
paper side guides a and paper length guide b
line up with the mark for the paper size you are
using.
d
Fan the stack of paper well to avoid paper jams
and misfeeds.
Note
• The components included in the box may differ
depending on your country.
• Save all packing materials and the box in case
for any reason you must ship your machine.
• You need to purchase the correct interface
cable for the interface you want to use (for USB
or network connection).
USB cable
Please make sure you use a USB 2.0 cable (Type
A/B) that is no more than 6 feet (2 meters) long
(cable not included).
Network cable
Use a straight-through Category5 (or greater)
twisted-pair cable for 10BASE-T or 100BASE-TX
Fast Ethernet Network.
1
1
1
3
3
2