AMD GA-M61SME-S2 - Manual (Page 37)

- 37 - BIOS Setup
NV SATA RAID function
Enabled Enable NV SATA RAID function.
Disabled Disable NV SATA RAID function. (Default value)
NV SATA 1 Primary RAID
Enabled Enable NV SATA 1 primary RAID function.
Disabled Disable this function. (Default value)
NV SATA 1 Secondary RAID
Enabled Enable NV SATA 1 secondary RAID function.
Disabled Disable this function. (Default value)
On-Chip IDE Channel0
Enabled Enable onboard 1st channel IDE port. (Default value)
Disabled Disable onboard 1st channel IDE port.
On-Chip MAC Lan
Auto Auto-detect onboard LAN chip function. (Default value)
Disabled Disable onboard LAN chip function.
NV Serial-ATA 1
Enabled Enable NV Serial-ATA 1 function. (Default value)
Disabled Disable this function.
IDE Prefetch Mode
Enabled Enable IDE data buffer to enhance HDD transfer speed. (Default value)
Disabled Disable IDE data buffer for the system stability.
USB Memory Type
SHADOW Set USB memory type to SHADOW. (Default value)
Base Memory(640K) Set USB memory type to base memory(640 K).
Onboard Audio Function
Auto Auto-detect onboard audio function. (Default value)
Disabled Disable this function.
Onboard LAN Boot ROM
This function decide whether to invoke the boot ROM of the onboard LAN chip.
Enabled Enable this function.
Disabled Disable this function. (Default value)
Onboard Serial Port 1
Auto BIOS will automatically setup the Serial port 1 address.
3F8/IRQ4 Enable onboard Serial port 1 and address is 3F8/IRQ4. (Default value)
2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8/IRQ3.
3E8/IRQ4 Enable onboard Serial port 1 and address is 3E8/IRQ4.
2E8/IRQ3 Enable onboard Serial port 1 and address is 2E8/IRQ3.
Disabled Disable onboard Serial port 1.