Brother MFC-8950DWT - Manual (Page 15)

12
Machine operation
3
Scan to E-mail server
3
Note
• For information on PDF/A, Secure PDF and Signed PDF, see PDF file format uu page 28.
• If you choose Secure PDF, the machine will ask you to enter a 4 digit password using numbers 0-9 before
it starts scanning.
• If you choose Signed PDF, you must install and then configure a certificate to your machine using Web
Based Management.
For the details on the certificate installation, see Digital Certificate Installation uu page 19.
a
Load your document.
b
Press (SCAN).
c
Press a or b to choose Scan to E-mail.
Press OK.
d
(For MFC-8520DN, MFC-8810DW and MFC-8910DW)
Do one of the following:
If you want to send a 2-sided document, press a or b to choose 1sided, 2sided (L)edge or 2sided
(S)edge
. Press OK.
If you want to send a single-sided document, go to step e.
Note
• You can send 2-sided documents from the ADF.
• When the machine is ready to scan 2-sided documents the LCD shows for Duplex in the lower right
corner.
e Press a or b to choose Change Setting. Press OK.
If you don’t want to change the quality, go to step j
f Press a or b to choose Color 100 dpi, Color 200 dpi, Color 300 dpi, Color 600 dpi,
Color Auto
, Gray 100 dpi, Gray 200 dpi, Gray 300 dpi, Gray Auto, B&W 300 dpi,
B&W 200 dpi
or B&W 200x100 dpi. Press OK.
Do one of the following:
If you choose Color 100 dpi, Color 200 dpi, Color 300 dpi, Color 600 dpi,
Color Auto
, Gray 100 dpi, Gray 200 dpi, Gray 300 dpi or Gray Auto, go to step g.
If you choose B&W 300 dpi, B&W 200 dpi or B&W 200x100 dpi, go to step h.