Brother MFC-250C - Manual (Page 24)

Chapter 2
10
i
While holding the paper tray in place,
pull out the paper support (1) until it
clicks, and then unfold the paper
support flap (2).
Note
Do not use the paper support flap for
Legal paper.
Loading envelopes and post
cards
2
About envelopes
2
„ Use envelopes that weigh from 20 to 25 lb
(80 to 95 g/m
2 ).
„ Some envelopes need margin settings to
be set in the application. Make sure you
do a test print first before printing many
envelopes.
CAUTION
DO NOT use any of the following types of
envelopes, as they will cause paper feed
problems:
• That are of a baggy construction.
• That are embossed (have raised writing
on them).
• That have clasps or staples.
• That are pre-printed on the inside.
Occasionally you may experience paper
feed problems caused by the thickness,
size and flap shape of the envelopes you
are using.
How to load envelopes and post cards
2
a
Before loading, press the corners and
sides of envelopes or post cards to
make them as flat as possible.
Note
If envelopes or post cards are
‘double-feeding’, put one envelope or post
card in the paper tray at a time.
1
2
Glue
2
Double flap
2