Message, Private call, 12 message – Avaya 15-601127 User Manual
Page 21: 13 private call
2420/5420 Phone
Page 21
15-601127 Issue 09a (16 July 2009)
IP Office
Basic Call Handling Features: Hold
2.12 Message
Message is used to access the voicemail system (if installed). Once pressed, the prompts given will depend on the
type of voicemail system. For further details, refer to the Mailbox Users Guides provided for the different voicemail
systems supported by IP Office.
The message lamp at the top of the phone stays lit when there are new messages in your voicemail mailbox, or in any
other mailbox for which you have been configured to receive "Message Waiting Indication".
Note
·
The lamp can also be set to flash when the phone is rung, irrespective of whether you have new messages waiting to
be read.
2.13 Private Call
The Private Call feature is used to prevent any intrusions during the call. Private call can be activated either before or
during a call and will set the phone status to 'cannot be intruded' until you switch the Private Call feature off.
If you place a call to an extension with Private Call on, you will hear the Number Unobtainable tone.
Note
·
Private call is not a default feature. If you require this option, contact your administrator.