beautypg.com

Changing the p-touch’s baud rate – Brother PT-9200DX User Manual

Page 35

background image

31

Power button

Changing the P-touch’s Baud Rate

The PT-9200DX’s default baud rate for a serial connection is 115,200 bps. Some computers may not support a serial port
baud rate of 115,200 bps. If so, follow the procedure below to change the P-touch’s baud rate to 9,600 bps. In addition, the
baud rate for the port must also be set to 9,600 bps.

1 Turn off the PT-9200DX.

2 Hold down the power button for about five seconds.

3 Release the power button when it begins flashing in red and green.

4 The baud rate of the PT-9200DX has been set to the slower baud rate of 9,600 bps.

See also other documents in the category Brother Printers: