Alpine cdm-9821 - Manual (Page 13)

11
-EN
Scanning Programs
1
Press the 6 ( ) button to activate the Scan
mode.
The first 10 seconds of each track will be played
back in succession.
To stop scanning, press the 6 ( ) button and
deactivate the Scan mode.
NOTE
In case a 6-disc CD changer is connected :
In CD changer mode, press the "F" button to illuminate
the "FUNC" indicator and go to step 1.
Controlling CD Changer (Optional)
If an optional Alpine 6-disc CD Changer is
connected to the 8-pin DIN connector (M-Bus) of
the CDM-9823/CDM-9821, you can control the
CD changer using the CDM-9823/CDM-9821.
NOTE
The CD controls designed specifically for CD changer
operation are functional only when a CD Changer is
interconnected with the CDM-9823/CDM-9821.
1
Press the SOURCE/POWER button to activate
the CHANGER mode.
2
Press the Disc Select buttons (1 through 6)
corresponding to one of the discs loaded in the
CD Changer. The selected disc number appears
in the display and CD playback starts.
NOTES
• After selecting the desired disc, you can operate in the
same way as for the CDM-9823/CDM-9821 CD
player.
For details, please see the CD Player Operation
section.
• If the "FUNC" indicator is illuminated the Disc Select
buttons become nonfunctional.
Music Sensor (Skip)
1
Momentarily press the g button once during
CD play to return to the beginning of the current
track. If you wish to access the beginning of a
track further back, repeatedly press until you
reach the desired track.
Press the f button once to advance to the
beginning of the next track. If you wish to access
the beginning of a track further ahead, press
repeatedly until the desired track is reached.
NOTE
The music sensor feature is functional in the play or
pause mode.
Fast Forward and Backward
1
Press and hold the g or f button to quickly
move backward or forward until you reach the
desired section of the track.
Repeat Play
1
Press the 4 ( ) button to play back repeatedly
the track being played.
The REPEAT indicator appears and the track will
be played repeatedly.
Press the 4 ( ) button again and select OFF to
deactivate the repeat play.
NOTE
If a CD Changer is connected and the REPEAT ALL
mode is selected, the unit repeatedly plays back all tracks
on the disc selected.
NOTE
In case a 6-disc CD changer is connected :
In CD changer mode, press the "F" button to illuminate
the "FUNC" indicator and go to step 1.
M.I.X. (Random Play)
1
Press the 5 ( ) button in the play or pause
mode.
The M.I.X. indicator will illuminate and the tracks
on the disc will be played back in a random
sequence.
To cancel M.I.X. play, press the 5 ( ) button
again to turn off the M.I.X.
NOTE
In case a 6-disc CD changer is connected :
In CD changer mode, press the "F" button to illuminate
the "FUNC" indicator and go to step 1.
→ →
REPEAT REPEAT ALL (OFF)
→
4/10-11_CDM-9821(EN) 03.7.31, 11:27 AM 11