Alpine cdm-9821 - Manual (Page 11)

9
-EN
Automatic Memory of Station
Presets
1
Press the SOURCE/POWER button to select the
radio mode.
2
Press the BAND button repeatedly until the
desired radio band is displayed.
3
Press and hold the TUNE/A. ME button for at
least 2 seconds.
The frequency on the display continues to
change while the automatic memory is in
progress. The tuner will automatically seek and
store 6 strong stations in the selected band. They
will be stored into presets 1 to 6 buttons in order
of signal strength.
When the automatic memory has been
completed, the tuner goes to the station stored in
the preset location No. 1.
NOTE
If no stations are stored, the tuner will return to the
original station you were listening to before the auto
memory procedure began.
Tuning to Preset Stations
1
Press the SOURCE/POWER button to select the
radio mode.
2
Press the BAND button repeatedly until the
desired band is displayed.
3
Press the station Preset button that has your
desired radio station in memory.
The display shows the band, preset number and
frequency of the station selected.
3/08-09_CDM-9821(EN) 03.7.31, 11:27 AM 9