Trio Motion Technology PCI 208 - Manual (Page 5)

ADDING
EXPANSION
MODULES AND
BATTERY
Unscrew the lower retaining fi xing (A) using the supplied tool or a
coin.
Remove the covers from the module (B).
Swing the expansion module (C) out from the rear and unclip from
the front end.
Replacing the module is the reverse of the procedure.
To replace the battery, insert screwdriver under the frontmost
ventilation slot (F) and prize off the battery cover (D) and pull the
battery ribbon to lift the battery (E) from the MC464. Replacing is
the reverse of the procedure.
A
C
B
D
E
B
F