Trio Motion Technology MC4N-ECAT - Manual (Page 9)

CAN 0V
C-Low
C-High
CAN 24V
This is a 5 way 3.5mm pitch connector. The
connector is used both to provide the 24 Volt
power to the MC4N CAN circuit and provide
connections for I/O expansion via Trio’s CAN
I/O expanders. A 24V dc, Class 2 transformer or
power source should be used.
This 24V input is internally isolated from the I/O
24V and main 24V power.
5-WAY CAN
CONNECTOR
The CAN connector may be left unused. The MC4N is
grounded via the metal chassis. Fit a short shield connection
between the chassis earth screw and the earthed metal
mounting panel / plate.
The SD Card maybe used for storing or transfering programs, recipes
and data to and from the MC4N. The card must be FAT32 format and
a maximum 16Gb size.
SD Cards may be FAT16 formatted when purchaced. Re-format in
a PC to FAT32 prior to use.
SD CARD