TOHO ELECTRONICS TTX-700 - Manual (Page 5)

2. Settings regarding TOHO communications
2.1 Overview
Before communications is performed, initial settings must be made on this product. Enter such
settings with the keys on the front panel. To switch to a series of setting screens, take the steps
described below. For details, see the operation manual furnished with this product.
MODE key
Select a communications setting mode
Set a communications protocol
Set a communications parameter
Set a communications speed
Set a communications address
Set a communications response delay
Set communications mode switchover
▲ ▼ key
(Setting mode selection screen)
MODE key at least 2 seconds
Operation mode screen
Power ON
Initial setting
MODE key
MODE key
MODE key
MODE key
MODE key
MODE key
When the settings are over, press the MODE key at least 2 seconds to go back to the operation mode.
The parameters indicated above are initial values.
５