Timeguard TRTD7 - Manual (Page 3)

3
3. Commissioning:
Contact your energy supplier to check which energy plan you are on, and
whether the off peak times change during winter and summer.
On the tariff table, on the reverse of the product (or at the end of these
instructions), find which programme correlates with your energy plan. Turn
the programme selector to the correct number for the programme. (if you
want a programme that isn't shown on the table, select the closest to your
desired programme, and this can be adjusted later).
On the back of the unit, select GMT only, or GMT BST depending on your
energy plan.
Screw the front of the unit to the back box, using the screws provided.
With the rocker switch in the OFF position, the unit can be programmed,
and the internal battery will charge.
With the rocker in the TIMED position, the output will be according to the
programme, or the appropriate boost period.
During off peak periods, the economy light will illuminate.
GMT only / GMT/BST switch
Program selector Tariff table