Timeguard DCC2 - Manual (Page 8)

7
4.2 Internal intercom
Choose a position which can be reached easily by all potential users. If one
person usually in one location will be the main user it may be considered
appropriate to locate the internal intercom within reach of that person.
Mark out two holes suitable for No. 8 roundhead screws using the wall
mounting plate as a template (ensure this is the correct way up by referring
to fi g 6).
Drill and plug the holes if necessary. Offer the wall fi xing plate up to the
wall and drive the fi xing screws home, ensuring the plate is not distorted by
mounting on an uneven surface.
Connect the four core lead from the external intercom according to fi g 2. Plug
the mains adaptor low voltage plug into the mains adaptor socket (see fi g 1).
Arrange the two cables at the back of the internal intercom. Finally locate the
internal intercom mounting slots on the wall fi xing plate mounting hooks, and
slide intercom downwards into position.
Fig 6
Mounting slots
Mounting holes
Rear of internal
intercom
Rear of wall
mounting plate
(this surface
facing wall)
Mounting hooks
DCC1_DCC2_Instructs_1.4.indd 8 DCC1_DCC2_Instructs_1.4.indd 8 30/1/07 11:02:57 am 30/1/07 11:02:57 am