Timeguard MTLW3000 - Manual (Page 3)

1
2
Parts included
• PIR Sensor unit.
• Instruction manual. Please keep safe for future
reference.
• Accessory Pack.
Tools and parts needed
• 3 core flexible cable.
• Electric/hand-held drill & bits.
• Terminal or Electricians screwdriver.
• Large slotted/philips screwdriver.
• Wire cutters.
This product is suitable for wall or ceiling mount.
Lighting loads connected must not exceed maximum
3000W filament/incandescent or 500W fluorescent/low
energy lighting.
Do not attempt to install during wet weather, if you
are suffering from nausea or dizzy spells or on
medication with similar side effects. If in any doubt,
consult a qualified electrician.
Not suitable for use with discharge lighting.
Selecting a location
The motion detector has a number of detection zones,
at various vertical and horizontal angles as shown (see
diagram A).
Dusk Time
C Lens Mask
Restrict long detection
Restrict RHS detection Restrict LHS detection
Restrict short detection
D