Timeguard FST17A - Manual (Page 7)

7.2 Modifying the Date and Time of Day
Normally the only change required will be to the time of day minutes, in which case
press and hold ‘Time’ for 2 seconds, during which the word ‘HOLD’ will appear in the
bottom left hand corner of the display.
Press ‘Time’ repeatedly until the minutes are shown flashing then use ‘Adv’ or ‘Bst’
to make the change.
Finally press ‘Time’ briefly to get back to operating mode.
Other changes can be made in the same way but the ‘Time’ button must be pressed
to get back to operating mode. There is no automatic exit from the date/time
setting mode.
8. Programming the ON/OFF Times –
FST17A only
8.1 Generating New Programmes
The FST17A has four independent ON/OFF periods available for programming each day.
The FST17A is a 7 day programmer, with options of 7 days the same (24 hrs),
5+2 days (where the weekdays are the same, and the 2 weekend days are the same)
and 7 individual days.
Press ‘Prog’ and hold for approx. 2 seconds. Whilst holding, the word ‘HOLD’ will show
in the top left hand corner of the display.
After 2 seconds the display will show:–
Use ‘Adv’ or ‘Bst’ to change the day grouping (MODE) at the bottom of the display.
This will step through the following programming options:–
24hr – Mo Tu We Th Fr Sa Su.
5 day – Mo Tu We Th Fr followed automatically in programming by 2 day – Sa Su.
Individual day – Mo followed automatically in programming by each of the other days.
Prog Adv
Time Bst
Year
Prog Adv
Time Bst
SET
Month
Prog Adv
Time Bst
SET
Day
Prog Adv
Time Bst
SET
Time
Prog Adv
Time Bst
SET
Time
Prog Adv
Time Bst
SET
Prog Adv
Time Bst
Mo
SET
MODE
Prog Adv
Time Bst
Mo Tu We Th Fr Sa Su
SET
Prog Adv
Time Bst
Mo Tu We Th Fr
Prog
ON
SET
Prog Adv
Time Bst
Mo Tu We Th Fr
Prog
OFF
SET
Prog Adv
Time Bst
Sa Su
Prog
ON
SET
BOOST 1
Prog Adv
Time Bst
Mo
ON
BOOST 2
Prog Adv
Time Bst
Mo
ON
Prog Adv
Time Bst
Mo
OFF