Timeguard FST17A - Manual (Page 2)

Status LED reset button
(recessed)
Sets
programmes
Sets date
and time
Display (back lit for 30 seconds
when any button is pressed)
Double pole
switch
BS 1362 (1"x 1 /
4
") fuse
Fixing hole
Boost for 1 or 2
hours and
decrements
displayed value
during time and
programme
setting
Override until
next programme
change and
increments
displayed value
during time and
programme
setting
1. General Information
Contents:
1 Supplymaster.
2
3.5mm screws.
1 Bag containing: 2 screws, cable blank and cable clamp.
1 Instruction leaflet.
The FST11A (24 hour) and FST17A (7 day) are units which mount onto a
BS 4662 flush mount single box, or a BS 5733 surface mount single box (25mm deep
in either case). There is provision for a single front exit output cable, with in-built
cable clamp.
The unit combines the facilities of a time switch and a double pole switched, fused
connection unit capable of being wired directly into a ring main. The contacts are not
volt free, and there is no provision for a permanent ON, or for earth continuity (for
which the back box termination can be used if required). The unit has automatic
daylight saving pre-programmed in.
8 8 8 8
8
TimeDayMonthYear
MODE BOOST 12
Prog Adv
FST-17A
Time Bst
Mo Tu We Th Fr Sa Su
Prog
ON
OFF
SE
T
HOLD
HOLD
Fig. 1
FST17A/FST11A Front Panel