Sterlco SIT Inventory Monitor Units - Manual (Page 2)

SIT Series
Inventory & Density Monitor Unit
2
PREFACE
The information in this manual is based on current industry sources and is
believed by the author to be correct and complete at the time of printing. It
is possible that later changes have been made by the manufacturers of the
equipment and are not included in this publication. Although every effort
has been made to insure total accuracy, ACS cannot assume any liabilities
for omission, errors or changes that have occurred in the production of this
manual. It is not possible to anticipate all possible conditions in which this
machinery may be utilized, maintained, or serviced. It is not possible to
provide cautions for all possible hazards. Operators and maintenance
personnel should use standard and accepted operating procedures and
precautions. ACS accepts no responsibility for the damages resulting from
the utilization of the information in this manual.
Copyright © ACS Group
____________________________________________________
The material in this publication was compiled for the use of ACS. No part
of this manual may be reproduced, stored, transmitted or distributed
without the prior written consent of ACS.
© 1998
Patents
____________________________________________________________
Equipment is manufactured under the following patents. Other patents
pending.
US: 5,261,743 - 5,172,489 - 5,148,943 - 5,110,521 - 4,756,348 -
4,454,943 - 4,148,100 - 4,108,334
Canada: 1,305,951 - 1,104,558
UK: 2,256,931B - 2,010,231B
France: 92 07272