Sterlco SVL Series Compressed Air Loaders - Manual (Page 33)

SVL-A, SVL-B, SVL-C, & SVL-D Self-Contained Material Loaders - Venturi Style 33 of 49
Disassembly
1. Remove the filter cartridge (A).
2. Blow out the filter cartridge (A) from the inside out using compressed air or
replace the filter.
3. Open the toggle-type fastener (SVL-B, SVL-C models) (C) and fold the
hopper lid upward.
4. Check the screen (B) within the lid for material residue.
5. Clean the screen (B) using compressed air.
Assembly
1. Clean the hopper loader using a vacuum cleaner.
2. Replace the cover gasket/screens (SVL-B, SVL-C.)
3. Close the hopper lid (SVL-B, SVL-C.)
4. Close the toggle-type fastener (SVL-B, SVL-C.)
5. Assemble the filter cartridge.
5-4 Adjusting the Level Probe
See Chapter 4: Setup, to properly adjust air flow.