beautypg.com

Sterlco SVL Series Compressed Air Loaders User Manual

Page 19

background image

SVL-A, SVL-B, SVL-C, & SVL-D Self-Contained Material Loaders - Venturi Style 19 of 49

2-6 Electrical

Connection

The operating voltage is 115 or 230 VAC, AC, PE, 50/60 Hz. Special voltages
available by request.

The connected load is approximately 2 Watts.

The connection is made using a main connector. A separate protection of the
socket is not necessary.

Connect the plug of the sensor cable to the control unit.

Plug the main connector into a corresponding socket.

Make sure all equipment is properly grounded.


WARNING!

Check with the local electricity board for regulations.