ROTRONIC HP22A - Manual (Page 10)

E-M-HP22-V2_13
Rotronic AG
Bassersdorf, Switzerland
Document code Unit
HygroPalm HP22-A hand-held indicator:
User Guide
Instruction Manual
Document Type
Page 10 of 16
Document title
© 2010-2012; Rotronic AG E-M-HP22-V2_13
4.9 Internal menu
Note: Unauthorized access to the menu can be prevented by disabling the “display menu” setting
(use the HW4 software > Device Manager > Display)
Main Menu
Menu Items Selections / Information Notes
Device Settings
Units Metric / English
Back Light Key Press / On / Off Display backlight mode
Contrast LC display contrast adjustment
Trend On / Off Trend indication on the display
AutoPwrOff
OFF
1 min
5 min
15 min
30 min
45 min
60 min
The HP22 powers itself down after
a user specified time period
Device Information
Version Firmware version
Serial Nbr Serial number
Address RS-485 address
Type Device type
Name Device name User defined
Probe Information
Version Firmware version
Serial Nbr Serial number
Address RS-485 address
Name Device name User defined
SensorTest Humidity sensor status Off / Good / SQ-Tuned / Bad
Record On / Off
Data recording by the probe
(max. 2000 values)
Humidity Adjust
RefValue Humidity reference value ± 0.1 %RH steps
Acquired
Number of cal. points in probe
memory
Save cal. point to probe memory
Erases all calibration points
Effect depends on number of
calibration points
Temperature Adjust
RefValue Temperature reference value
± 0.1 ˚C steps
1-point adjustment only (offset)
o
Record: both the recording mode (start / stop and the log interval cannot be changed from the menu and
are as configured with the ROTRONIC HW4 software