Prochem Everest CARB - Manual (Page 21)

OPERATIONS
EVEREST 980086 02/18/03
3-12
VACUUM
INLET
WASTE
LUBRICATION
CUP
GAUGE
VACUUM
HEATER COIL #1
HEATER COIL #2
HEATER COIL #3
SILENCER
PUMP
VACUUM
LEVEL SENSOR
FILTER
STRAINER
TANK
VACUUM
VALVE
RELIEF
VACUUM SYSTEM
The engine turning an air pump generates vacuum.
The air is channeled in one side of the vacuum
pump, compressed and discharged on the opposite
side, creating airflow.
The movement of air is used to do the work
necessary for the extraction process. A vacuum
nozzle applied to the carpet surface removes
moisture, dirt and spent chemicals. These elements
are conveyed back to a separating tank utilizing
hoses and the force of air. Particles of moisture and
dirt are separated in the vacuum tank using a series
of changes in direction and velocity. The air is then
filtered and rushes into the vacuum pump.
The vacuum pump compresses and heats the
incoming air. The hot discharged air is forced down
stream into a silencer for noise abatement. After
exiting the silencer, this hot air is mixed with hot air
and gases from the engine. This mixture of hot air
and gases are then forced through 3 radiators
serving as heat collectors. Heat from the engine
and vacuum pump is then transferred into the
plumbing system raising the water temperature for
better cleaning.