PNI SpacePoint Scout - Manual (Page 18)

PNI Sensor Corporation Doc #1017545 r03
SpacePoint Scout User Manual – January 2013 Page 18 of 19
To stop outputting data press „0‟.
6.5 Running the Motion Tracking Screen
The SpacePoint Scout Test Program also provides a 3-D rendering of the SpacePoint
Demonstration Module. This is accessed by pressing “M” to toggle to the Motion Tracking
screen. Pressing the “H” key brings up the data window, just as on the Point Tracking
screen. Press the „2‟ key to start outputting data. Note that the rendered image will not
change, even though data is being output. Initialize and align the viewpoint in the Motion
Tracking screen by pressing „P‟. Now the rendered image will track the orientation of the
device.
Pressing „M‟ again toggles you back to the Point Tracking Screen.
6.6 Exiting the Program & Summary of Commands
To exit the program, press the “x” key on your computer‟s keyboard. Table 6-1 summarizes
the various commands for the SpacePoint Scout Test Program.