Ouellet OHY - Manual (Page 3)

180, 3 e Avenue, LʼIslet (Québec) G0R 2C0 CANADA
Telephone: (418) 247-3947, 1 800 463-7043
Fax: (418) 247-7801
www.ouellet.com
USER MANUAL
OHY SERIES
You have just purchased a highly sophisticated heater unit
establishing new standards in design and precision while
being filled with industry-first characteristics. This heater will
bring you warmth and piece of mind for the years to come. If
you have any question concerning your unit, do not hesitate
to communicate with our customer service department.
Hybrid Series is a convection and forced-air wall heater of
great power including an integrated electronic thermostat, a
completely quiet timer, a night light with integrated switch, a
contemporary look and a user-friendly interface. The thermos-
tat manages when the fan needs to start in order to keep a
constant temperature.
Please read and understand this user guide completely
before using the heater. Failing to follow this user guide and
if the heater is not installed according to installation instruc-
tions included in the box, the manufacturer will not be liable
for the warranty.
HEATER OPERATION
Once the unit is powered up the blue display indicates the
ambient temperature in degree Celsius (°C) or Fahrenheit
(°F). To change the units from °C to °F or vice versa, press
the two buttons with arrow signs on the right side of display
simultaneously for two (2) seconds.
IMPORTANT: The 1 st stage of heating (1000W) is a natural
convection type, it is normal that you feel heat coming out of
the grill even if the fan is not running. The fan will start only
with the 2 nd stage of heating or in timer mode.
For the set point temperature, use the top arrow button ( )
and the down arrow button ( ) to adjust the setting between
10 to 35 °C (50 to 95 °F). When heater is on, four gradated
lines indicate the power level on the left side of the display.
For timer mode (boost heating), use the hour-glass button
located on the left side of display. Press once to activate this
mode and to see the remaining time flashing (“min” is now
displayed in the bottom right corner). Display will stop flash-
ing after five (5) seconds. While the remaining time flashes,
press again the button on the left to set the minutes to 5, 10,
15, 20, 25 or 30. If display does not flash any more, press
again the button on the left to turn off the timer. Whenever
needed in the timer mode, use the arrows located on the
right side to increase or decrease remaining time. When in
the timer mode ambient temperature is not displayed.
To turn on and off the night light use the button located
underneath. The night light is a low-consuming device due to
its technology.
NOTICE
When starting up the heater for the first time, some smoke
will come out of the louvers; this is totally normal and will
stop after a few minutes of use. Also, under normal use the
heater may become hot.
SAFETY
To avoid problems do not allow water in and make sure no
splash get inside heater. IMPORTANT: DO NOT USE
HEATER AS A TOWEL DRYER. DO NOT COVER HEATER
WHEN POWERED ON.
MAINTENANCE
Clean heaterʼs interior on a regular basis to remove dust.
Clean front grills as dust may accumulate due to the impor-
tant air flow. DISCONNECT POWER BEFORE CLEANING
AND SERVICING. REPLACE FRONT COVER BEFORE
PUTTING POWER BACK.
TROUBLESHOOTING
WARRANTY
Ouellet Canada Inc. warrants the electric heating element of
the OHY Series for a five (5) year period and the component
parts against defects in material and workmanship for a two
(2) year period following the date of purchase, under normal
use and service, when proof of purchase of such is provided
to the manufacturer. The obligation of Ouellet Canada Inc.,
under the terms of this warranty, will be to supply a new unit
and this omits the manufacturer to bear the installation costs
or other secondary charges linked to replacing the unit or the
component part(s).
INS119-200702-02
PROBLEMS TIPS
Heater stops working in
timer mode (boost mode).
Make sure front of heater has at least
1219 mm (48 in) of clearance and is free
of any objects.
Displayed temperature
differs from ambient
temperature.
Wait for a while that temperature stabi-
lizes. This thermostat uses proportional
integral adaptive technology; temperature
will remain precise except when important
cold or hot air flows occur. Fan operation
as well as room recognition have to be
considered and may influenced precision
of temperature readings.
Interior of heater glows red.
Make sure voltage applied is appropriate
(120V or 240V depending on model)
and that interior of heater is free of dust
blocking heating wires.
Grills are getting darker. Clean grills using water and mild soap.