NORD Drivesystems BU0130 - Manual (Page 7)

NORDAC SK DA-130E
BU 0130 DE techn. changes reserved 7
1.1 Delivery
Examine this appliance for damage as a result of transport such as deformation or loose parts immediately
after arrival/unpacking.
In case of damage, contact the shipper at once and arrange for a thorough examination of the goods.
Important! This also applies if the packaging was unadamaged.
1.2 Scope of delivery
The SK DA-130E is delivered with the relevant system connections and connection points for a 3-phase motor.
Only the supply voltage and a control signal are required for startup.
The following NORD components are included in the field distributor module SK DA-130E:
• Frequency inverter SK 300E (SK 300E-xxx-340-B)
• Standard customer interface I/O (SK CU2-STD)
• Technology box with bus activation (e.g. InterBus SK TU2-IBS)
As an option, cables for the connection between the field distributor and the hybrid cable from NORD, which
are available in different vatieties, can be supplied.
1.3 European EMC directive
If the NORDAC SK DA-130E is installed according to the recommendations of this manual,
it will meet all the requirements of the EMC directive, in accordance with the EMC product
standard EN60947-4-2 for low voltage control units, semiconductor motorised control units
and starters AC voltage.