Metpar Polly Solid Plastic(HDPE) User Manual

Page 3

Metpar tips…

1. Plan ahead… coordinate all of the materials and hardware for each specific layout. Study your layout

drawings and evaluate any special conditions that may require custom size materials, unique hardware or

special tools.

2. When you determine the centerline dimensions, refer to the stall depths shown on your layout drawings.

The centerline is ½” less than the stall depth.

3. Read all of these instructions carefully and thoroughly. Reading this manual first will better prepare you

for the entire installation.

Hardware Nomenclature…

Polly orders are normally provided with 54” full height bright dipped anodized aluminum brackets. Because the
panels, doors and pilasters are all 1” thick, the same bracket is inter-changeable and can be used on panels or

pilasters. The Metpar drawings will illustrate the type of bracket to be used at each location.

#144 FULL HEIGHT

FULL HEIGHT 54” 2-ear bracket (#12174) for panel-to-wall or panel-to-stile connections.

Also in 41” length (#12175) for wall hung urinal screens and 70” for panel-to-stile connections on CH700.

#145 FULL HEIGHT

FULL HEIGHT 54” 1-ear bracket (#12193) for panel-to-wall, panel-to-stile or stile-to-wall

connections. Also in 70” length for panel-to-stile connections on CH700.

#148 FULL HEIGHT

FULL HEIGHT 54” U-bracket (#13310BD) for panel-to-stile connection. Also used on panel-to-

post connections such as on a “PF” screen.

#148 FULL HEIGHT

FULL HEIGHT 54” U-bracket assembly (2pcs #13310BD) used for alcove panels attached “in-

line” with the edge of a pilaster. In this scenario, your packing list will show these channels twice, once with a
note indicating “do not drill holes”. A separate detail will be included as an attachment if your job requires it.

1½” x 2” FULL HEIGHT

FULL HEIGHT 54” angle bracket (#13390) used to attach posts to the wall.

#148 Headrail U-bracket (#12410) used to attach the end of the headrail to the wall.

1½” x 2” x 1¼” angle in the Headrail Angle Kit (#15921) used to attach the end of headrail to the face

of perpendicular headrail.

Metpar’s Polly

Installation Manual ~ February 2003