Ft/m, f " (see fig.9) – Dwyer 8904 User Manual

Page 10

Text mode
Original mode

3. Press the MIN/MAX REC key, the LCD
should display "S" (See Fig.10) .
Then press the HOLD key. The LCD
display 2400 or 1200 (pre-setting).
(If Baud rate change is needed, please
refer to step G.1) (See Fig.11)

4. Press the MIN/MAX REC key again,
the LCD should display "S" again.
(See Fig.10) .Then press the HOLD
key, the LCD will revert to a normal
measurement display. The default
setting is now completed.(See Fig.12)

To choose the imperial units, pressing the
AVERAGE key. The LCD should display

"ft/m, F" (See Fig.9).

ft/m

Fig.9

Fig.10

Fig.11

Fig.12

m/s

vel