Dwyer LCT316 User Manual
Dwyer instruments, inc, Series lct316 low cost digital timer
Series LCT316 Low Cost Digital Timer
Specifications - Installation and Operating Instructions
Bulletin PC-LCT316
DWYER INSTRUMENTS, INC.
Phone: 219/879-8000
www.dwyer-inst.com
P.O. BOX 373 • MICHIGAN CITY, INDIANA 46361, U.S.A.
Fax: 219/872-9057
e-mail: [email protected]
The Series LCT316 Low Cost Digital Timer provides accurate
countdown timing for a variety of applications. The timer can be
triggered remotely using the digital input terminals or locally via
the set button. Time intervals can be set up to 999 minutes or
seconds. The Series LCT316 has an internal buzzer to alert
when the time interval has expired.
INSTALLATION
Unit must be mounted away from vibration, impacts, water and
corrosive gases.
• Cut hole in panel 2.80 x 1.14 inches (71 x 29 mm).
• Apply silicone (or rubber gasket) around the perimeter of the
hole to prevent leakage.
• Insert unit into hole of panel.
• Slide removable fitting clips onto unit from the back until
secure to panel.
• Wiring diagram as seen in figure A is displayed on the top of
the unit.
SPECIFICATIONS
Operating Temperature Range: 32 to 158°F (0 to 70°C).
Control Output Ratings: Relay, SPST NO, 16A at 250 VAC
resistive.
Weight: 5.6 oz (158.8 g).
Status Light: LED shows time and operation.
Inputs: Digital input for start and reset.
Supply Voltage: 115 VAC, 230 VAC, 12 VAC/DC, 24
VAC/DC depending on model.
Power Consumption: 4VA.
Agency Approvals: CE, UR.
NOTICE
Figure A
1-1/8
[28.57]
2-7/16
[61.91]
3
[76.20]
1-11/32
[33.99]
REMOTE
COUNTDOWN
INPUT
WIRING DIAGRAM
POWER
SUPPLY
OUT
OUTPUT
1
2
3
4
5
6
7
PC-LCT316:TEMPLATE 8/3/09 11:12 AM Page 1