Crystal Pump Systems User Manual
Page 5
Overview
3
GaugeCalHP Comparator Operation Manual
Parts Included with Pump Systems
System G
GOX and GWX
(GaugeCalHP)
Part Number
Description
MPF15K-1/4FPT
CPF Female to 1/4" NPT Female Fitting
MPF-1/4BSPF
*
CPF Female to 1/4" BSP Female Fitting
MPF-1/8MPT
*
1/8” MPT Fitting (for 30 Series Calibrator)
**
( 2 )
MPF-CAP
*
CPF Female Cap Fitting
( 2 )
60R120
1/4” Bonded Seals
( 5 )
5102
Fine Adjust (installed)
1351
Test Leads; Red & Black, including clips
**
5249
Protective Vinyl Cap
( 4 )
60I104
Pack Tape (1 roll)
5101
Rolling Waterproof Carrying Case
*
These fittings are rated to 10 000 psi/100 bar.
**
The MPF-1/8MPT fittings and 1351 Test Leads are included only with Pump Systems for the 30 Series Calibrator.
Hydraulic Fluid
GaugeCalHP comparators are only available delivered empty. You will still need to specify what fluid type you are going to use (for example; GOX for Oil or GWX for Water).
Ordering a Pump System
Any GaugeCalHP Pump System may be ordered with or without a reference indicator. The table below provides an explanation of the Pump System ordering
scheme when ordering a system without an indicator. For details on ordering the Pump Systems with an indicator, see the indicator datasheet.
Reference Indicator
Reference Indicator Included
Pump System
Liquid
nVision . . . . NV
No . . . -NONE
System G (GaugeCalHP–oil) . . . . . . -GOX
Drained . . . -E
30 Series . . . IS30
System G (GaugeCalHP–water) . . . -GWX
XP2i . . . . . . . XP2i
m1 . . . . . . . . . M1
X
SAMPLE PART NUMBERS
NV-NONE-GOX-E
. . . . . . .
System G pump system (for an nVision), drained of fluid, for use with oil.
IS30-NONE-GWX-E
. . . .
System G pump system (for an nVision), drained of fluid, for use with water.
15KPSIXP2i-GWX-E
. . .
System G pump system, drained, for use with water, with a 15 000 psi XP2i
gauge included.