Crystal Pump Systems - Manual (Page 6)

Overview  4
P014 Hydraulic Jack Pump Operation Manual
Parts Included with Pump Systems for Crystal Reference Indicators
System E
EXX
(P014) Part Number Description
5253 CPF Male to Screw Pump Adapter „ ( 2 )
5254 1/4" BSP Female to 1/4" BSP Female Fitting „
MPF-1/4FPT CPF Female to 1/4" NPT Female Fitting „
MPF-1/4BSPF CPF Female to 1/4" BSP Female Fitting „
MPF-1/8MPT * 1/8" MPT Fitting (for 30 Series Calibrator) „ ( 2 )
MPF-CAP CPF Female Cap Fitting „
SPK-HPC-004 1/4" BSP Male to 1/4" BSP Male Banjo Connector „
60R955 1/4" Male BSP Plugs „ ( 4 )
60R120 1/4" Bonded Seals „ ( 5 )
60P013 1/4" BSP Male Fine Adjust „
1351 * Test Leads; Red & Black, including clips „
5249 Protective Vinyl Cap „ ( 4 )
60I104 Pack Tape (1 roll) „
60R159 Allen Key „
124004 Shoulder Strap „
124303 Aluminum Carrying Case „
* The MPF-1/8MPT fittings and 1351 Test Leads are included only with Pump Systems for the 30 Series Calibrator.
Ordering a Pump System
Any P014 Pump System may be ordered with or without a reference indicator. The table below provides an explanation of the Pump System ordering scheme
when ordering a system without an indicator. For details on ordering the Pump Systems with an indicator, see the indicator datasheet.
Reference Indicator Reference Indicator Included Pump System Liquid
nVision . . . . NV No . . . -NONE System E (P014) . . . -EXX Full . . . . . . . (omit)
30 Series . . . IS30 Drained . . . -E
XP2i . . . . . . . XP2i
m1 . . . . . . . . . M1
Carrying Case
Pump System E is delivered with an Aluminum Carrying Case with the pump filled with hydraulic oil. The pumps
may be shipped drained by entering -E in the pump system ordering code. See
Ordering a Pump System below.
X SAMPLE PART NUMBERS
NV-NONE-EXX . . . . . . . . . . System E pump system (for nVision) filled with oil.
IS30-NONE-EXX-E . . . . . System E pump system (for 30 Series) drained of fluid.
5KPSIXP2i-EXX . . . . . . . . System E pump system filled with oil with a 0-5000 psi XP2i included.