Overview, Introduction – Crystal APM Advanced Pressure Module User Manual
Page 3
Overview
1
APM CPF Series Operation Manual
Overview
INTRODUCTION
The Crystal APM CPF series of pressure modules allow you to add pressure measurement capability to your JOFRA process calibrator. The APM uses the same
reliable, high accuracy, digital temperature compensated technology found in the nVision, housed in a new rugged enclosure with an integrated cable to con-
nect to your JOFRA calibrator. In addition, you can connect the APM to a hand-held pressure calibrator to increase the range of that calibrator.
Supported JOFRA Calibrators
The Crystal APM has been engineered to work seamlessly with many of the most popular JOFRA calibrators. Below is a list of compatible JOFRA calibrators.
•
AMC910
•
ASC300
•
ASC301
•
ASC321
•
ASC-400
•
ASC-400 BARO
•
HPC500
•
HPC502
•
HPC600
Note:
This manual includes information on the APM CPF modules only. For details on the operation of JOFRA calibrators, please refer t
What's Included
Each unit includes an APM CPF pressure module, a fitting of your choice (NPT, BSP, or M20), NIST traceable calibration certificate, and AMETEK product CD.
Crystal Engineering calibration facilities are A2LA accredited, (#2601.01) which is internationally recognized by ILAC.
Note:
A CPF adaptor fitting is not included with 15 000 psi / 1000 bar / 100MPa APM models. The module connector is compatible with 1/4 medium pressure
tube system, HIP LM4 and LF4 Series, Autoclave Engr SF250CX Male and Female Series
for additional adapter fittings.