Crystal DataLoggerXP Digital Pressure Gauge Software - Manual (Page 32)

Safety & Certifications  30
XP2i Operation Manual
eMc ec declaration of conformity ateX ec declaration of conformity
DECLARATION OF CONFORMITY
According to ISO/IEC 17050-1:2004
Manufacturer’s Name: Crystal Engineering Corporation
An AMETEK Inc. company
Manufacturer’s Address: 708 Fiero Lane, Suite 9
San Luis Obispo, CA 93401
USA
Declares under sole responsibility that the product as originally delivered
Product Name: Digital Pressure Gauge
Model Number: XP2i Series and XP2i-DD Series
Product Options: Battery or DC Power Supply Accessory
Complies with the essential requirements of the following applicable European Directives, and carries the CE marking
accordingly:
EMC Directive 2004/108/EC EN 55011: 2007, +A1: 2010 Harmonized
EN 61326: 2006 Harmonized
And conforms with the following product standards:
Standard Description Class Status EHSR
EN 55011: 2007, +A1: 2010 Conducted Emissions Class B Pass Harmonized
EN 55011: 2007, +A1: 2010 Radiated Emissions Class B Pass Harmonized
EN 61326-1:2006 (EN 61000-3-2: 2006) Current Harmonic Emissions Pass Harmonized
EN 61326-1:2006 (EN 61000-3-3: 2008) Voltage Variations & Flicker Pass Harmonized
EN 61326-1:2006 (EN 61000-4-2: 2009) Electrostatic Discharge Pass Harmonized
EN 61326-1:2006 (EN 61000-4-3: 2006) Radiated Immunity Pass (1) Harmonized
EN 61326-1:2006 (EN 61000-4-4: 2004, A1: 2010) Electrical Fast Transient / Burst Pass Harmonized
EN 61326-1:2006 (EN 61000-4-5: 2006) Surge Immunity Pass Harmonized
EN 61326-1:2006 (EN 61000-4-6: 2009) Conducted RF Immunity Pass Harmonized
EN 61326-1:2006 (EN 61000-4-8: 2010) Magnetic Field Immunity Pass Harmonized
EN 61326-1:2006 (EN 61000-4-11: 2004) Voltage Dips and Interruptions Pass Harmonized
(1) Product exhibited a temporary change in performance when operating as specified and operator intervention was not required to resume normal operation as
defined by Criteria B. Magnitude of incorrect data was 0.14psi on 300psi digital pressure gauge.
I hereby declare that the equipment named above has been designed to comply with the relevant sections of the above referenced
specifications. The unit complies with all essential requirements of the Directives.
USA Signatory: European Signatory:
______________________________
Division Vice President & Crystal Business Manager
David K Porter, P.E.
Crystal Engineering Corporation, an AMETEK Inc. company
708 Fiero Lane, Suite 9, San Luis Obispo, CA 93401, USA
+1 805 595 5477
AMETEK Denmark A/S
Gydevang 32-34, 3450 Allerød, Denmark
+45 4816 8000
4 April 2013
DECLARATION OF CONFORMITY
In accordance with the ATEX Directive 94/9/EC
Manufacturer’s Name: Crystal Engineering Corporation
An AMETEK Inc. company
Manufacturer’s Address: 708 Fiero Lane, Suite 9
San Luis Obispo, CA 93401
USA
Declares under sole responsibility that the product as originally delivered
Product Name: Digital Pressure Gauge
Model Number: XP2i Series and XP2i-DD Series
Product Options:
Complies with the essential requirements of the following applicable European Directives, and carries the CE marking
accordingly:
ATEX Directive 94/9/EC
And conforms with the following product standards:
Marking II 1G Ex ia IIC T4 Ga, Ta = -20C to 50C, Rayovac Max Plus 815
II 1G Ex ia IIC T4 Ga, Ta = -20C to 50C, Energizer E91
II 1G Ex ia IIC T3 Ga, Ta = -20C to 50C, Energizer EN91
II 1G Ex ia IIC T3 Ga, Ta = -20C to 50C, Duracell MN1500
Standard EHSR
EN 60079-0: 2009 Harmonized
EN 60079-11: 2012 Harmonized
EN 60079-26: 2007 Harmonized
EC-Type Examination Certificate FTZU 12 ATEX 0048 X
FTZU, Notified Body 1026
Pikartska 7, 716 07 Ostrava Radvanice
Czech Republic
I hereby declare that the equipment named above has been designed to comply with the relevant sections of the above referenced
specifications. The unit complies with all essential requirements of the Directives
USA Signatory: European Signatory:
______________________________
Division Vice President & Crystal Business Manager
David K Porter, P.E.
Crystal Engineering Corporation, an AMETEK Inc. company
708 Fiero Lane, S u ite 9, San Luis Obispo, CA 93401, USA
+1 805 595 5477
AMETEK Denmark A/S
Gydevang 32-34, 3450 Allerød, Denmark
+45 4816 8000
4 April 2013