Ask Proxima 700 User Manual
Page 10
USER GUIDE
LCD PANEL
9
4.2
VIDEO
Connect the LCD panel to a video source as shown in the rear foldout.
Use a TV set as a local video monitor if desired (the data monitor may not
be used as a video monitor).
Connect the video cable (1) to the VIDEO connector on the LCD panel.
Then connect the video cable to the video out connector on the video
source.
S-VIDEO, often referred to as S-VHS, may be connected using an optional
S-VIDEO cable.
TO SET UP FROM THE REMOTE CONTROL :
STEP
OPERATION
1
Press COMP, S-VIDEO or VIDEO depending on input used
2
If necessary POSITION correctly
3
If necessary, adjust COLOR saturation and TINT.
4
Adjust CONTRAST, BRIGHTNESS as desired
See also other documents in the category Ask Proxima Projectors:
- Ultralight LS2 (1 page)
- C130 (50 pages)
- DP2000s (2 pages)
- DP2800 (83 pages)
- IN42 (49 pages)
- DP6810 (1 page)
- ASK M3 (32 pages)
- DP9240 (1 page)
- DP6105 (2 pages)
- C410/C420 (50 pages)
- + DP6850 (1 page)
- DP6150 (1 page)
- C420 (DP8200X) (1 page)
- C90 (11 pages)
- DP2300 (71 pages)
- C440 (13 pages)
- M5 (1 page)
- Pro AV 9410 (2 pages)
- Pro AV 9310 (2 pages)
- Ultralight SV1 (19 pages)
- DP5610 (1 page)
- C105 (DP6155) (1 page)
- DP9250 (52 pages)
- Campus 300 (2 pages)
- Pro AV 9350 (2 pages)
- C300HB (3 pages)
- DP6100 (4 pages)
- DP5600 (45 pages)
- Pro AV 9300 (2 pages)
- DP9260 (1 page)
- C5 (1 page)
- DP5800 (5 pages)
- 9100 (103 pages)
- C40 (DP2000s) (3 pages)
- C420 (1 page)
- C1 (1 page)
- 21 (1 page)
- C160 (1 page)
- Ultralight DS2 (1 page)
- Impression 860 (46 pages)
- C440/C450 (61 pages)
- Ultralight LS1 (49 pages)
- A9+ (8 pages)
- Pro AV 9310L (49 pages)