beautypg.com

N1022a active probe adapter, N1022a active probe adapter 1 – Agilent Technologies N1022A User Manual

Page 5

background image

1

N1022A Active Probe Adapter

N1022A Active Probe Adapter

The N1022A Active Probe Adapter provides the interface to connect an
Agilent Infiniimax Active Probe to an Agilent 86100-series Infiniium DCA. To
use the N1022A requires that firmware revision A.03.05 or later be installed on
the Infiniium DCA.

The Infiniimax Active Probes include the following: 1131A, 1132A, and 1134A.

Other supported active probes include the 1152A, 1156A, 1157A, and 1158A.

C A U T I O N

When using the N1022A, always work at a static-safe work station and wear a
wrist-strap or heel-strap.

Refer to “Static-Safe Workstation” on page 8

.

C A U T I O N

The probe adapter connections can be damaged if it is dropped from excessive
heights onto a hard surface.

See also other documents in the category Agilent Technologies Hardware: