Warren Controls 313 Overflow Trap - Manual (Page 7)

7
Level COntrols - IOM 313 313_IOM_RevAb_1112
Information Present on 313 Overflow Trap
There is a great deal of information present on each overflow trap ranging in importance from the part number and
serial number to numbers stamped on the tank. This information is important for identifying the overflow trap, installing
it correctly, and obtaining parts. An example of the current factory serial number label used on 313 overflow
traps is shown here. The accompanying table identifies the information present and where to find it on the overflow
trap. There may also be other numbers and marks present that do not provide useful information. Customer specific
tagging may also present. The labels or plates used, and information present, on Warren Controls other product lines
or older overflow traps may be different, contact the factory for details.
Factory Serial Number Label Installation Orientation Label
INFORMATION PRESENT ON 313 OVERFLOW TRAPS
Part Number & Serial Number
Information Symbol(s) Location Notes
Part number P/N On end cover • On Factory Serial Number Label attached to end cover.
Serial number SERIAL NO. On end cover
and
valve cover
• On Factory Serial Number Label attached to end cover.
• Sales order number only stamped on valve cover.*
* Number stamped using approximately 1/8 inch tall characters
Installation Orientation
Information Symbol(s) Location Notes
Top of overflow trap TOP On tank • On Installation Orientation Label attached to side of tank.
Up direction UP On tank • On Installation Orientation Label attached to side of tank.
iNFORmATiON PRESENT ON 313 OvERFLOw TRAP
There is information present on each overflow trap ranging in importance from the part
number and serial number to numbers stamped on the tank. This information is important
for identifying the overflow trap, installing it correctly, and obtaining parts. An example
of the current factory serial number label used on 313 overflow traps is shown here.
The accompanying table identifies the information present and where to find it on the
overflow trap. There may also be other numbers and marks present that do not provide
useful information. Customer specific tagging may also present. The labels or plates used,
and information present, on Warren Controls other product lines or older overflow traps
may be different, contact the factory for details.
FActOry SEriAL
NumBEr LABEL
iNStALLAtiON
OriENtAtiON LABEL
iNFORmATiON PRESENT ON 313 OvERFLOw TRAPS
PART NUmBER & SERiAL NUmBER
InformatIon Symbol(S) locatIon noteS
Part number P/N On end cover * On Factory Serial Number Label attached to end cover.
Serial Number SERiAL NO. On end cover
and valve cover
* On Factory Serial Number Label attached to end cover.
* Sales order number only stamped on valve cover.*
* Number stamped using approximately 1/8 inch tall characters
iNSTALLATiON ORiENTATiON
InformatIon Symbol(S) locatIon noteS
Top of overflow trap TOP On tank On installation Orientation Label attached to side of tank.
Up direction UP On tank On installation Orientation Label attached to side of tank.