7 print readings – Thermo Fisher Scientific CyberComm Pro for CyberScan pH 1100 & pH 2100 User Manual

Page 26

Instruction Manual

CyberComm pH 1100/ 2100

7 PRINT

READINGS

7.1

Printing using a serial printer

Connect the pH 1100/ 2100 meter to the serial printer via RS232C cable (refer to the list of accessories). The
configuration of the RS232C port is as shown below.

Pin Number

Description

1 -

2 Transmit

Data

3 Receive

Data

DSR (Data Send Ready)

5 GND

(Ground)

6 -

7 -

RTS (Request to Send)

9 -

7.2

Setting Up the Printer

If the printer has a 25-pin connector, a 25-pin to 9-pin converter will have to be used. Use the following
configuration:

Pin of Meter

Pin Number of Printer

2 (TXD)

3 (RXD)

4 (DSR)

20 (DTR)

5 (GND)

7 (GND)

7.3

Connecting the Cable to the Computer

a) If the computer has a 9-pin connector, insert the cable (EC-CA01M09F09) provided into the socket of the

computer, taking note of the gender of the two connectors.

b) If the computer has a 25-pin connector, use a 9-pin to 25-pin, male/ female converter with 9 pins and 25

holes for connection. This converter can be obtained from any computer store.