Thermo Fisher Scientific CyberComm Pro for CyberScan pH 1100 & pH 2100 - Manual (Page 17)

Instruction Manual CyberComm pH 1100/ 2100
13
Icon 12. mV Settings
See Figure 17.
a) mV Alarm Settings
Using the Low and High options, select the ‘safe’ range of
readings. Any readings not within the selected range will trigger the
alarm alert.
b) mV Calibration Due
Check to enable the calibration due warning or uncheck to disable
it.
Calibration due period can be set from 1 to 365 days to remind you
of the calibration due.
c) mV
Stability
Check the box to enable mV Stability Indicator; indicator is
disabled when box is unchecked. Select from Low, Medium to
High to get the preferred level of stability in readings respectively.
(Low for low stability in readings, Medium for medium stability and
High for high stability in readings)
d) Reset mV Calibration Settings
Check box & click apply to reset mV calibration settings.
Click on OK or Apply to save settings whenever there are changes.
F igure 17: mV Settings