Techne TC-3000G - Manual (Page 49)

47
Connecting several TC-3000G units to a PC.
If you are driving two or more units then you will need a USB cable for each unit, part number 6205046
plus a hub, which will connect multiple units together.
Computer
USB
cable
USB hub
USB cables
RUNNING THE TC-3000G FROM A PC
The TC-3000G can be run from a PC using Bibby Scientific Ltd's Gensoft software. Instructions for using
Gensoft are included in a separate manual.
Connecting one unit to a PC
To connect a single TC-3000G unit, connect the unit to the PC using the USB cable, part number
6205046.
TC-3000G USB cable