Techne TC-PLUS Satellite - Manual (Page 30)

30
Time Enter the hold time of the step. For ease of use, the time can be entered
in seconds. For example for 30 seconds type 30s or for 10 minutes type
600s. On moving to the next parameter box the time entry will auto-
correct to the hh:mm:ss format.
Temperature Enter the required temperature for the step.
Insert a step Click on this to insert another step in the current stage.
To delete a step, click on the step area so that it is highlighted in orange
and click Delete.
Insert a stage Click on this to insert another stage in the program.
To delete a stage, click on the stage area so that it is highlighted in
orange and click Delete.
Insert a pause To insert a pause between stages, click on Insert a pause. The hold
temperature will be that of the previous step. The unit will not continue
with the remainder of the program until it is manually un-paused by the
user.
To delete a pause, click on the pause button to highlight it and then
touch Delete.
Increment/decrement
time To add an increment or decrement time to the hold time of a step, click
on the arrow key next to the Time parameter box.
A prompt will show the maximum and minimum allowed limits. Enter the
required value in the appropriate box. Click the arrow key again to close.
A step modified with an increment/decrement time will be highlighted
with an orange dot.