Part ii, Installation, connection and setting – Revo REJCPTZ-2 User Manual

Page 9

PTZ Camera Control command Index

Control of a PTZ camera:

All directions on the joystick are functional

Pressing the Control key acts as a turbo mode, momentarily speeding

up the camera’s pan and tilt functions

P/T right or left:【Joystick】move to right or left

P/T up or down:【Joystick】move up or down

Lens Zoom:【Joystick】twist counterclockwise or clockwise

Lens Focus:【SHIFT】+【Joystick】move to left or right

Lens Iris:【SHIFT】+【Joystick】move to up or down

Set preset:【#】+【SHIFT】+【PRESET】

Call preset:【#】+【PRESET】

Clear preset:【#】+【SHIFT】+【CANCEL】, then select 【OK】

to clear preset

Run Auto Scan:【#】+【AUTO】

Run Tour:【#】+【TOUR】

Run Pattern:【#】+【SHIFT】+【MENU】

On Command:【#】+【ON】

Off command:【#】+【SHIFT】+【AUTO】

NO. + PGM+ Tour:【#】+【SHIFT】+【TOUR】

NO. + PGM+ Scan:【#】+【ESC】

When Data is 0000,

Press【PRESET】to enter Preset menu

Part II

Installation, Connection and Setting

■Accessories
■Size
■Introduction
■Power On
■Keyboard Hints

Installation, Connection and Setting

Before installation, please check to see that all accessories are present. If not, contact

your supplier.

Accessories:

Keyboard:

1 unit.

Power supply: 1 unit (AC110/220V input DC12V/1000mA output).

Testing cable: 1 piece (Two wires for (“A” or “+”) and (“B” or “-“) connections.)

User Manual: qty. 1