Asante Technologies INTRACORE 3724PWR User Manual
Page 132
network dhcp-relay vlan
Format network dhcp-relay vlan <vlan-ID> remove
Mode Global Config
11.3.13.5 network sysinfo
Configure switch system information.
Network sysinfo sysname
This command configures system name.
Format network sysinfo sysname <WORD>
Mode Global Config
network sysinfo syslocate
This command configures system location.
Format network sysinfo syslocate <WORD>
Mode Global Config
network sysinfo syscontact
This command configures system contact information.
Format network sysinfo syscontact <WORD>
Mode Global Config
11.3.13.6 network admin-timeout
This command configures web/console admin time out interval.
‘0’ means disable.
Format network admin-timeout <0-65535>
Mode Global Config
11.3.14 port-all commands
11.3.14.1 port-all admin-mode
This command configures ports admin mode.
Format port-all admin-mode {enable | disable}
Mode Global Config
11.3.14.2 port-all auto-negotiate
This command configures ports auto-negotiation mode.
Format port-all auto-negotiate {enable|disable}
Mode Global Config
11.3.14.3 port-all flow-control
This command configures ports flow control.
Format port-all flow-control {enable|disable}
Mode Global Config
11.3.14.4 port-all portsec-lockmode
Configure port security.
1) port-all portsec-lockmode none
This command disable port security.
Format port-all portsec-lockmode none
Mode Global Config
2) port-all portsec-lockmode static
Note: This commands only support on G24-PORTS 100BASETX + 2 GIGABIT
COMBO PORTS LAYER 2 MANAGEMENT SWITCHL/ G48 100BASETX + 4
GIGABIT COMBO WITH 2 SHARED MINI-GBIC SLOTS LAYER 2+
MANAGEMENT SWITCH.
This command enable static lock mode.
Format port-all portsec-lockmode static
Mode Global Config
3) port-all portsec-lockmode dynamic
This command enable limited dynamic lock mode.
Format port-all portsec-lockmode dynamic max-entries <0-24>
Mode Global Config
11.3.14.5 port-all rate-limit
Configure rate limit value on all ports.
132
Asante IC3724PWR
User’s Manual