Asante Technologies INTRACORE 3724PWR - Manual (Page 120)

11.2 Privileged Mode commands
11.2.1 cable-diag
This command is used to proceed cable diagnostic
Format cable-diag port <port ID>
Mode Privileged Mode
e.g. Switch#cable-diag port 1
11.2.1 clear
11.2.2.1 clear arl
This command is used to clear ARL table entries
Format clear arl
Mode Privileged Mode
1) clear arl dynamic
This command is used to Clear dynamic arl table entries
Format clear arl dynamic
Mode Privileged Mode
2) clear arl static
This command is used to clear static arl table entries
Format clear arl static mac <mac-addr>
Mode Privileged Mode
11.2.2.2 clear config
This command is used to restore switch factory default configuration
Format clear config
Mode Privileged Mode
11.2.2.3 clear counters
This command is used to clear RMON statistics for entire switch
Format clear counters
Mode Privileged Mode
11.2.2.4 clear IGMPsnooping
This command is used to restore igmpsnooping configuration to factory default
Format clear igmpsnooping
Mode Privileged Mode
11.2.2.5 clear static-mcast
This command is used to clear static multicast groups
Format clear static-mcast
Mode Privileged Mode
11.2.2.6 clear pass
This command is used to restore administrator’s password to factory default
Format clear pass
Mode Privileged Mode
11.2.2.7 clear lacp
This command is used to restore LAG and LACP configuration to factory
default
Format clear lacp
Mode Privileged Mode
11.2.2.8 clear logs
This command is used to clear memory/flash logs
Format clear logs
Mode Privileged Mode
11.2.2.9 clear VLAN
This command is used to delete all VLAN groups
Format clear vlan
Mode Privileged Mode
11.2.3 configuration
120 Asante IC3724PWR User’s Manual