NOSHOK 850 Series Electronic Temperature Switch User Manual

Page 8

Text mode
Original mode

1) The pressure units setting applies immediately for the switching point settings, the reset points
and for the process pressure 4-digit LED display.

Temperature units

Degree Celsius
Degree Fahrenheit
Switch 1, Set Point

Select set point for first switch

Switch 2, Reset Point

Select reset point for first switch

Contact 1

Select contact function for first switch

Normally open

Select normally open contact

Normally closed

Select normally closed contact

Current high

Select temperature value for 20mA

Current low

Select temperature value for 4mA

Store

The previous changes are only accepted if button 2 is

pressed about 15 seconds after the previous button press!

With one switching output and one analog output