NOSHOK 850 Series Electronic Temperature Switch - Manual (Page 3)

The temperature switch has one analog output and one switching output or two switching out-
puts. The switching output(s) is (are) adjusted using the two buttons: set point, reset point
(hysteresis), switching function (normally closed/normally open contact).
The programmable analog output is a special feature. It can be adjusted in 0.1° steps within a
span of at least 20% of the temperature range.
2
Exclusion of Liability
NOSHOK guarantees that the pressure switch is in perfect working condition when it is delivered.
The basis consists of the technical data in the data sheet and these operating instructions.
Liability cannot be accepted for the suitability of the pressure switch.
Temperature Switch Description
Electrical and Mechanical Connection
The technical regulations must be complied with during installation and dismantling.
The system must be depressurized prior to installation and dismantling.
Safety regulations must be complied with, particularly when working on the electrical
system. All connections to external electrical equipment must be made in accordance with
regulations.
The power to system must always be swit
tch is being connected.