Martel Electronics TC100 - Manual (Page 6)

4
Warning
To avoid possible electric shock or
personal injury:
• Do not apply more than the rated voltage.
See specifications for supported ranges.
• Follow all equipment safety procedures.
• Do not use the calibrator if it is damaged.
Before you use the calibrator, inspect the
case. Look for cracks or missing plastic. Pay
particular attention to the insulation surround-
ing the connectors.
• Select the proper function and range for your
measurement.
• Make sure the battery cover is closed and
latched before you operate the calibrator.
• Remove test leads from the calibrator before
you open the battery door.
• Do not use the calibrator if it operates abnor-
mally. Protection may be impaired. When in
doubt, have the calibrator serviced.
• Do not operate the calibrator around explo-
sive gas, vapor, or dust.
• When servicing the calibrator, use only speci-
fied replacement parts.
• To avoid false readings, which could lead to
possible electric shock or personal injury,
replace the battery as soon as the battery
indicator appears.
Caution
To avoid possible damage to calibrator or
to equipment under test:
• Use the proper jacks, function, and range for
your measurement or sourcing application.