Martel Electronics TC100 - Manual (Page 15)

Power Requirements
Battery 9 Volt alkaline; 006P/ IEC 6F22/
NEDA1604
Optional NiCad
Optional AC adapter/charger
Mechanical Dimensions
5.7" x 3.15" x 1.43"
(14.47 cm x 8.00 cm x 3.63 cm)
Weight 12 ounces (340 grams)
Notes: 1.Temperature standard ITS-90.
11. Warranty
Martel Electronics Corporation warrants all
products against material defects and work-
manship for a period of twelve (12) months
after the date of shipment. Problems or defects
that arise from misuse or abuse of the instru-
ment are not covered. If any product is to be
returned, a “Return Material Authorization” num-
ber must be obtained from our Customer
Service Department. This number must be indi-
cated on the return package as notice to our
Receiving Department to accept the shipment.
Any package not so marked will not be accept-
ed and will be returned to the shipper. Martel
will not be responsible for damage as a result
of poor return packaging. Out of warranty
repairs and recalibration will be subject to spe-
cific charges. Under no circumstances will
Martel Electronics be liable for any device or
circumstance beyond the value of the product.
13